|
| |
|
What is HX MP3 Recorder Software?
HX MP3 Recorder software is a professional audio recorder. It is
the best tool to record your voice by microphone or audio master
card or out line.
And you can convert the wav to mp3 by hxrecord [HX MP3 Recorder].
|
|
|
Common questions:
1.Why can't I record ?
Answer1.serval reasons as listed below:
(1)sound card is not installed correctly, in this case, though it works well on
play, but badly on record.
(2)Mic is not pluged well, find if it is on the wrong hole.
(3)confilct with other software. You can restart or logout the OS.
2.How to sart a new record?
Answer: select "file"-->"new " on the menu, then you can start a new record. otherwise your record will continue to the current position.
3.How to record from the Mic?
Answer: Confirm your input equipments are well prepared(default resource is Mic),
then click the "record" key and begin recording;when finish, click "save" key to save .
4.How to record the audio flow from sound card? How to record from tape or out-connect equipment?
Answer:select "tool"-->"record control" on the menu, select the right record source(eg.fixed sound).Do not select the "Mic
record", then you can record the music those only for hear.
if record from from tape or out-connect equipment, please select "Line-in" for record resource.
5.How to convert the record file to MP3?
You can convert the WAV files into MP3, or MP3 to WAV .only provide for register.
6. I'd like to record the music that are being played on the internet.can i get it?and how?
Answer:first, you must have a full-duplex sound card that is provided commonly by markets. Don't support semi-duplex sound card.
7.I have added some device in the voice conctrol program, and the panel can hardly hold any. May i slim it in the condition of not deleting device?
Answer:Yes, you can.
In the "voice setting" or "record setting", press "Ctrl+S",
all device ard showed fully.
under this status, close the "voice contrl" program,
you can still get this slim show next time.
8.When i record the music from tape by using PC, the audio line is well connected. After i click the "record"
button, it does not work. Why?
Answer:Apparently, you did not set the right "record source."
first, confirm that one part of the audio line is well pluged to the output port of
tape, the other part one is well pluged to the "LINE IN" port of PC.
Then, open the voice control program, add "LINE" control device in "record control setting"
, and select "Line record. if the sound card does not offer "LINE IN"
port, use the port "PHONE" of mic and select "Mic" as record source.
|
|
|
|
|
|
|
|
|
| |
e-Mail：popocy@163.com
MSN：popocy@hotmail.com